Durability testing > MO-612STC/LD
Previous
Next
- CAN/LIN communication with ECU
- 6 independent testing stations
- Can perform all tests done on P612 machines
- Performance tests:
- Slack removal
- Full retraction / Pre-safe
- Body impact simulation up to 700N
- Measurements:
- Standby, sleeping, operating current
- Voltage over retractor
- Force on retractor
- Webbing position
- Linear and non-linear spring emulation
- 3 x 1500W power supplies
- Brushless closed loop servomotors for webbing extraction
- Motorized linear acceleration sled on each station
- Stations are built for climate chamber
- LIN/CAN connections for motorized seatbelts
- Graphical representation of measurements
- Results are saved in a database
- Flexible reporting with custom test report formats
- Multiple export formats for test results
Retractor angles
Left/right
± 45°
Forward/backward
± 90°
Motors
Webbing motor acceleration
up to 6 g
Vehicle motor acceleration
up to 1 g
Load
Load cell range
1300 N
Load cell resolution
0.05 N
Dynamic load
up to 300 N
Static load
up to 700 N
Power supplies
Quantity
3
Voltage
up to 16 V
Current
up to 60 A
Current measurement
up to 50 A
Current measurement ranges
100 µA
100 mA
50 A
100 mA
50 A
Temperature
Measurement range
-40 to +100 °C
Resolution
0.1 °C
Station temperature range
-35 to 85 °C